Toll Free: 1-800-423-9911
Office Hours: Mon-Fri, 8am-5pm
271 Westec Drive
Mt. Pleasant, PA 15666
The toughest enclosures on the planet and always Made in the USA!
Product Spotlight: PB20-4X Printer Enclosure/in Press Releases, Printer Cabinet Enclosures, Printer Enclosures /by Matt
Mt. Pleasant, PA (February 28, 2023) – With almost four decades of industrial enclosure engineering and expertise under its belt, ITSENCLOSURES is happy to spotlight the NEMA 4X PB20 stainless steel printer enclosure. This state-of-the-art enclosure is designed specifically for the protection of barcode printers on a harsh factory floor. The PB20-4X enclosure is fabricated out of 304 stainless steel and measures 20” High by 20” Wide by 24” Deep.
The NEMA 4X printer enclosure boxes will protect against dirt, dust, hose directed fluids, and corrosive liquids, which are often in abundance in industrial and factory settings. On the interior of the enclosure, the PB20-4X offers an adjustable 20-inch extended sliding shelf, which provides easy access to the printer and media/labels. The sliding shelf can support printers weighing up to 80 pounds. A stainless steel hinged printer door, to retrieve printed materials, is available on the front door. Both doors provide waterproof gasketing and quarter turn compression latches.
JT Spangler, CEO/Owner of ITSENCLOSURES, is passionate about the company’s stainless steel enclosure offerings, “In the last 8 or so years, we have had great success with our NEMA 12 printer enclosure, which holds various brands of label printers, including Zebra, Brother, Sato, Dymo, and Rollo. We knew that a NEMA 4X version would also do quite well in the marketplace. The stainless steel printer box enclosure is a natural fit in our best-selling printer enclosure product line. We also knew that the NEMA 4X PB20 would be perfect for the pharmaceutical, beverage, and food industries.”
Based on the printing application, ITSENCLOSURES’ offers printer enclosures available in NEMA 12, NEMA 4 and NEMA 4X ratings. A customer can customize the printer enclosures with stationary or mobile pedestals at varying heights. Plus, various thermal management options are available, including a filtered fan system or vortex cooling unit. For a fee, a sealed cable entry gland can be installed in the rear of the enclosure for dust tight, waterproof wiring and cabling. A polycarbonate window can also be added in place of the hinged printer door.
“Our enclosures are tough and built to last. We take pride in the quality and sturdiness of each and every product that leaves our facility. I have visited factories that have been using the same IceStation enclosures for over 25 years. To me, that speaks volumes about our company and our heavy duty products,” added Mr. Spangler.
ITSENCLOSURES fabricates the most durable electronics enclosures on the market and ships every product completely assembled and ready to use upon delivery. For more information on ITSENCLOSURES and their wide array of state-of-the-art enclosures, please visit www.ITSENCLOSURES.com, send an email to firstname.lastname@example.org, or call 1-800-423-9911 to talk to an ITSENCLOSURES representative.
For more information, visit the PB20-4X product page
Product Spotlight: Rack Enclosure IR72-12/in Blog, Press Releases /by Matt
Mt. Pleasant, PA (December 2, 2022) – With almost four decades of expertise in the industrial enclosure market, ITSENCLOSURES is pleased to showcase one of their popular rack enclosures: the NEMA 12 IceStation IR72-12. This heavy-duty rack enclosure is designed to enclose various electronics and rack mount equipment. The IR72 enclosure measures 72” high x 24” wide x 38” deep and is constructed out of heavy-duty 12-gauge steel with 16-gauge steel side panels. In order to bolt together multiple units, the enclosure’s side panels (sealed with gasket) can be removed.
For rack mounting applications, the IR72 comes with 19-inch wide adjustable, mounting rails; customize with square punched or tapped rails. The IR72 has 38U of interior rack mount space and the rails attach to the rack enclosure’s built in uni-strut. The rack mounts rails are installed in the front and rear of the cabinet and feature an adjustable depth to allow proper equipment positioning. Dust-tight split panels are located on the top and bottom of the enclosure to run cables, cords, and wires of varying sizes.
The IR72’s front and rear doors can be locked – for security – with key locking 3-point latches. The full view window (on the front door) is ideal for equipment monitoring and offered in tempered safety glass or Lexan polycarbonate. The front and rear doors feature reversible hinges to increase placement flexibility.
JT Spangler, Owner of ITSENCLOSURES, discusses ITSENCLOSURES’ industrial enclosures, “Our goal has always been to supply our customers with tough, protective enclosures for any harsh environment. Our NEMA 12 enclosures will protect your essential electronics from dust, dirt, grease, lint, fibers, and splashing fluids. Each and every day, we continue to design, tweak, and fabricate innovative enclosure solutions as electronics, computers, printers and monitors evolve. ‘Forever and a day’ is the standard that we have set for ourselves since the very early days of ITSENCLOSURES. This will never change.”
Easily transport the rack mount enclosure around the factory floor with the included industrial grade casters. The front casters are lockable and the rear casters swivel. Lifting eyes, mounted on the top of the rack enclosure, can also be used to move the enclosure. For those companies that require the enclosure to be stationary, anti-tip legs or bolt down legs are available.
Thermal management options include a 200 CFM filtered fan system (2 complete systems can be installed easily), which will keep air flowing throughout the enclosure. The fan and exhaust will create a positive pressure, which eliminates damaging dust and dirt from entering the enclosure. Other thermal management options include different sizes of air conditioners, a vortex cooling unit, or a NEMA 12 heat exchanger.
ITSENCLOSURES designs and builds the most durable rack enclosures on the market and ships all of their innovative products completely assembled and ready to use upon delivery.
For more information on ITSENCLOSURES and their large array of industrial products, visit www.ITSENCLOSURES.com, send an email to email@example.com, or call 1-800-423-9911 to talk to an ITSENCLOSURES sales representative.
Questions for Selecting a Vented Rack Enclosure/in Blog, Press Releases /by Matt
A rack enclosure is a must for companies/IT departments to store servers and network equipment. The overall organization of the equipment should be a top concern. For the best organization, electronics should be housed inside of a vented rack enclosure. This provides functionality, arrangement, passive cooling, and, above all, security. In the beginning of the process, there are basic questions, which should be posed, to find the perfect vented enclosure solution for the needs of a customer or end-user.
Questions to Determine the Best Vented Rack Enclosure Solution;
Before installing electronics, it is important to evaluate how much equipment will be stored inside of the enclosure. This will help determine the overall dimensions of the vented enclosure or how many U of rack mount space (the height of the enclosure; a U equals 1.75 inches) is needed. To store a large amount of equipment, multiple enclosures can be ganged/bolted together to house everything.
With electronic equipment, many cables, wires, and cords will reside inside of the vented enclosure either vertically or horizontally. Split panels, metal or plastic conduit, sleeves, or small openings should be available for cables to enter/exit the enclosure. The proper cable management will aid in organizing the cables and ensure that everything remains plugged in. Cable management also reduces the risk of cables being pinched or cut when closing a door.
Some vented enclosures (and the electronics inside) may be accessed by anyone at the company, while other enclosures may need to be secured under lock and key. If the enclosure needs to be secured and kept private, choose an enclosure with key locking latches on the doors and side panels. Lockable doors provide easy access, while maintaining equipment protection.
Accessories should be considered before purchasing a vented enclosure for a server or network, including air circulating fans (single, double, quadruple), rack mountable surge protectors, power cords, drawers, shelves (stationary or sliding), filler panels (should fit the standard 19” EIA compliant mounting), levelers, bolt down legs, and industrial grade castors. These accessories will create an enclosure environment which keeps everything orderly and easy to navigate.
Carefully consider each question above, or your vented rack enclosure choice may result in a less than ideal solution. Before finalizing the purchase, make a list of everything that is needed and be sure to check it a few times. If the enclosure is heavily researched, it will keep electronics safe and secure for many years in the future. This will save money and prevent unnecessary downtime.
HAVE QUESTIONS? LET US KNOW HOW WE CAN BEST ASSIST YOU! CONTACT AN ‘ITSENCLOSURES EXPERT’ AT 1-800-423-9911 -or- SEND US AN EMAIL: INFO@ITSENCLOSURES.COM
Product Spotlight: Monitor Enclosure – 22” Monitor/in Industrial Enclosures, Press Releases /by Matt
Mt. Pleasant, PA (August 18, 2022) – For almost 40 years, ITSENCLOSURES has been engineering heavy-duty, industrial enclosures, like the IceStation brand of products – the leader in computer, printer, and monitor enclosures. ITSENCLOSURES’ monitor enclosure line includes the IO28 monitor enclosure, available in both NEMA 4 and NEMA 4X versions.
The NEMA 4 IO28 enclosure is constructed out of carbon steel (14/12 gauge CRS welded construction), can be deployed outdoors or indoors, and is designed to protect a wide screen monitor (up to 22 inches) and a thin client computer. Ideal for areas with limited space, the enclosure measures 28” high x 26” wide x 8” deep. The durable NEMA 4 rated is offered in blue, gray, or any custom RAL color (for additional charge).
The NEMA 4X IO28 enclosure is fabricated out of type 304 stainless steel (14/12 gauge) and is the perfect fit for the food & beverage and/or pharmaceutical industries. The IO28-4X features a sloped top – for wash down applications – which prevents water from pooling.
Both IO28 enclosure doors feature a padlock staple and a viewing window (19.25” wide X 12.25” high and 22.8″ diagonal) which is available in polycarbonate or tempered safety glass. The enclosure door is opened with two quarter-turn, flathead screwdriver style latches. Key locking latches are also available as an upgrade.
“We continue to be the leader in built-to-last, industrial enclosures. Whether it is indoors or outdoors, monitor enclosures are ideal for deploying computers/monitors in harsh manufacturing environments. Like many of our IceStation products, these enclosures evolved from a need to use electronics in a place where they would not survive unless properly protected,” said JT Spangler, President/Owner of ITSENCLOSURES. “This product has been on the market for many years and continues to sell to new and returning customers.”
Both enclosures include an integrated VESA mount, which eliminates the need to utilize the monitor stand. For access behind the monitor, the VESA bracket tips forward to provide space to house a small form PC and surge protector. For proper airflow, the VESA support has a built-in 100 CFM fan. ITSENCLOSURES offers additional thermal management options, including a closed loop heat exchanger, outdoor filtered fan system, and a vortex cooling unit (requires compressed air).
The IO28 enclosures can be customized to include a fixed or fold down keyboard tray or roll-out keyboard drawer (folds down to offer an ergonomic wrist rest). The monitor enclosures can be mounted to a wall or pole using a universal mounting bracket, bolt-down pedestal, or mobile pedestal. A waterproof, cable entry gland can be installed to route cables into the enclosure.
Mr. Spangled added, “We provide effective enclosures, for any operating environment, to protect vital electronics from dirt, dust, fluids, grease, lint, fibers, and corrosive materials.”
ITSENCLOSURES is always adding more exciting enclosure products to the marketplace. IceStation enclosures are shipped fully assembled and ready to use upon arrival and Always Made in the USA!
# # # #
HAVE QUESTIONS? LET US KNOW HOW WE CAN BEST ASSIST YOU!
CONTACT AN ‘ITSENCLOSURES EXPERT’ AT 1-800-423-9911 -or- SEND US AN EMAIL: INFO@ITSENCLOSURES.COM
Product Spotlight: Rack Mount Enclosure IR40/in Press Releases /by Matt
Mt. Pleasant, PA (December 10, 2021) – With over 35 years of enclosure experience, ITSENCLOSURES carries various rack enclosures, including the IR40-12 Rack Mount Enclosure. Constructed out of heavy-duty 12-gauge steel (frame and doors), the rack enclosure measures 40” High by 24” Wide by 42” Deep, making it one of the deepest enclosures in the ITSENCLOSURES line of products.
The IR40-12 is perfect for various industrial and factory settings and is equipped with 19-inch wide, fully-adjustable mounting rails with 20U (35 inches) of interior rack mount space. The front door (opening 19.5″ x 35″) features a full view glass window and both the front and back doors have two key locking latches. A fastener secured split entry panel on the bottom and top of the enclosure allows for dust tight cable/cord/wire entry.
The durable side panels are constructed out of 16-gauge steel and can be removed, in order to join together multiple IR40 enclosures. With industrial grade casters, the IR40-12 can be positioned on the manufacturing floor with ease. Need to secure the cabinet to the floor? Bolt down legs are available to be installed in place of the casters.
According to JT Spangler, Owner/President of ITSENCLOSURES, innovative industrial products make ITSENCLOSURES stand out from the crowd, “We are not surprised that our industrial products, like the IR40 rack mount enclosure, sell quite well every year. They are one of our best enclosures and the name ‘ITSENCLOSURES’ continues to resonate amongst our customers. IceStation products are always tough and built to last for many years. Computers, peripherals and any other vital electronics are carefully protected in our products.”
Thermal management options include a filtered fan system, which can be installed in various places on the rack enclosure. The fan and exhaust have positive pressure that will eliminate harmful dust and dirt entry. A NEMA 12 heat exchanger, which contains two 4-inch, 100 circulating fans, is another viable option. For warmer environments, air conditioners or a vortex cooling unit are available to help create the perfect temperature to successfully operate servers, uninterrupted power sources (UPS), and other electronics.
Customize the IR40 with fixed or sliding shelves, cable management, a power cord, and rack mountable power strips.
NEMA 12 enclosures protect against dust, dirt, lint, fibers, grease, and splashing fluids, which are prevalent in most manufacturing settings. ITSENCLOSURES skillfully designs and builds the most durable electronics’ enclosures on the market and ships every product completely assembled and ready to use upon delivery. All products are made in the USA.
For more information about ITSENCLOSURES and their large array of products, visit www.ITSENCLOSURES.com, email firstname.lastname@example.org, or call 1-800-423-9911 to talk to an ITSENCLOSURES sales representative.
For more information on the IR40 or a free quote, visit the IR40 Product Page.
Product Spotlight: NEMA 4X TITAN Computer Enclosure/in Industrial Enclosures, Press Releases /by Matt
Mt Pleasant, PA (August 5, 2021) – ITSENCLOSURES (Integration Technology Systems) designs, engineers, and fabricates the most heavy-duty computer enclosures, monitor enclosures, printer enclosures, and rack/electronic enclosures on the market.
Designed specifically for heavy washdown environments, the NEMA 4X IceStation TITAN (IS603027-4X) enclosure body is constructed out of 14-gauge, type 304 stainless-steel and 12-gauge doors with a #3F vertical finish. The computer enclosure stands 60” high by 28” wide by 27” deep, with a sloped top for cleaning and water run-off.
The stainless-steel TITAN’s lower portion provides ample space to house a computer, printer, UPS, power supply, and additional electronics. An adjustable shelf, attached to uni-strut, is standard and can be used for easy placement of electronics. The rear door (50.95” high by 24.85″ wide) is ideal for accessing the back of the electronics stored inside of the enclosure. The lower front door (27.45” high by 24.85″ wide) and rear door feature lift-off hinges for easy door removal, quarter turn, knob-style compression latches, and dual durometer EPDM gasket to ensure a water-tight seal.
“Over the past few years, the stainless-steel IceStation TITAN has become one of our best selling NEMA 4X enclosures,” exclaimed JT Spangler, President and Owner of ITSENCLOSURES. “The NEMA 4X TITAN’s stainless steel body – with almost no ‘nooks and crannies’ – makes it the perfect computer enclosure for the food, beverage, and pharmaceutical industry. Available in NEMA 12, 4, and 4X, our IceStation TITAN enclosures are heavy-duty, built to last computer enclosures and are a robust addition to any factory, plant, or distribution facility.”
The large viewing window is available in tempered safety glass or a polycarbonate plastic. The monitor door is hinged at the bottom and folds down to accept up to a 24-inch monitor. An adjustable monitor shelf, with popular VESA mounting patterns, is included for monitor installation. Below the monitor, the NEMA 4X TITAN computer enclosure has a sloped work surface with a 5-degree slant, for a keyboard, mouse, switches, or to simply use as a desk/writing surface.
Heavy-duty, swivel casters are a standard feature. When the enclosure is in its desired location, the front casters lock into place. For areas that require a stationary workstation, stainless steel bolt down legs or stainless steel sanitary legs can be installed in place of the castors.
Customize the NEMA 4X TITAN with accessories, including sliding shelf brackets, 19” wide rack mount rails, waterproof USB ports (for outside connections), a sealed cable entry gland, a power strip, a sub-panel, an industrial keyboard or various thermal management options, such as a heat exchanger, outdoor filtered fan system, or vortex cooling unit.
Proudly ‘Made in the USA,’ ITSENCLOSURES ships its innovative products completely assembled and ready to use upon delivery.
HAVE QUESTIONS? LET US KNOW HOW WE CAN BEST ASSIST YOU! CONTACT AN ‘ITSENCLOSURES EXPERT’ AT 1-800-423-9911 -or- SEND US AN EMAIL: INFO@ITSENCLOSURES.COM
New Freestanding Printer Enclosure at ITSENCLOSURES/in Press Releases /by Matt
Mt. Pleasant, PA (January 27, 2021) – Innovating in the field of industrial enclosures since 1985, ITSENCLOSURES announces a newly designed IceStation enclosure: the PB56-12 – NEMA 12 freestanding Printer Enclosure.
The printer enclosure is constructed to shield laser-jet printers or label barcode printers on harsh and dirty factory floors. The PB56-12 enclosure is fabricated out of 12-gauge painted steel and measures 56” high by 26” wide by 26” deep. The maximum printer dimensions for the PB56-12 are 14″ high x 20″ wide x 23″ deep in the top of the enclosure and 25″ high (19.5” if utilizing a filtered fan system) x 20″ wide x 23″ deep in the bottom of the enclosure. The bottom portion can also be used as storage for labels, paper, ink, or other necessary printer materials.
The IceStation enclosure has lockable lift and turn compression latches on the front and rear steel doors (12-gauge) for security and protection from harsh elements. The top door comes standard with a hinged printer door – which maintains a tight seal via gasket and forceful industrial magnets – to retrieve labels or documents. A second hinged printer door can be added to the bottom door for an additional charge.
The top interior of the enclosure features an adjustable 22” extended sliding shelf, which provides access to the printer to switch out labels, paper, ink, or other media. The sliding shelf can be adjusted vertically and will support printers weighing up to 100 pounds.
“As printing applications become more and more prevalent in factories, plants, and industrial facilities, we found that manufacturing enterprises need heavy-duty, industrial printer enclosures. The PB56-12 enables an end user to have one or two printers in a freestanding enclosure and the overall height makes it easy to retrieve printed materials. At ITSENCLOSURES, our goal is to continue to innovate and create products that are useful in industrial environments. Versatile enclosures are the cornerstone of our core business and we guarantee all of our products forever and a day,” said JT Spangler, Owner and President of ITSENCLOSURES.
The freestanding enclosure has a gasketed, tool free split panel for dust tight cable entry and industrial grade casters, which lock in the front and swivel in the rear. If the enclosure is required to be bolted to the floor, a set of 4.5” high bolt-down legs can replace the castors. Lift eyes, on the top of the enclosure, can also be used to transport the enclosure into place.
Numerous thermal management options are available for the PB56 printer enclosure. The most popular cooling device is the filtered fan system, which creates positive pressure on the inside of the enclosure and prevents dirt or dust entry. For cooler environments, a thermostatically controlled heater can be installed to maintain ideal operating temperatures.
“Our printer enclosures will protect a customer’s printer and significantly limit downtime. Quality and durability make ITSENCLOSURES stand out from the competition. We simply make the best, most durable enclosures in the United States and we do it with American steel and an American work force,” added Mr. Spangler
The freestanding printer enclosure is coated with a polyester powder paint finish and available in blue, gray, or any custom color found on the RAL color chart. The PB56-12 offers NEMA 12 protection, meaning the printer enclosure will safeguard against dust, dirt, light/splashing fluids, lint, grease, and fibers in the air. It is built to withstand harmful elements from entering the enclosure.
Designing durable enclosures for over 35 years, ITSENCLOSURES (Integration Technology Systems) manufactures the best electronics enclosures on the market and ships every product completely assembled and ready to use upon delivery. Every product is fabricated in Western Pennsylvania, outside of Pittsburgh.
PB56-12 Product Page: Click Here
For more information on ITSENCLOSURES and the wide array of state-of-the-art enclosures, please visit www.ITSENCLOSURES.com, send an email to email@example.com, or call 1-800-423-9911 to talk to an ITSENCLOSURES sales representative.
ITSENCLOSURES Introduces NEMA 4 Desktop Rack Enclosure/in IceStation, Press Releases, Rack Mount Enclosures /by Matt
Mt. Pleasant, PA (May 26, 2020) – For over 35 years, ITSENCLOSURES has been designing and constructing the toughest rack enclosures in the enclosure marketplace. IceStation by ITSENCLOSURES is happy to announce a new heavy-duty enclosure solution for rack mountable electronics (switches, routers, and network equipment): the NEMA 4 desktop IR282626-04 rack enclosure. The NEMA 4 enclosure will guard against dust, dirt, grease, hose directed water, corrosives, and weather conditions like rain, sleet, and snow.
Designed with 19” square punched rack channel (supports square cage-nuts for either #10-32 or M6 threaded mounting screws), the IR28-04 rack enclosure is fabricated out of 14-gauge cold rolled steel with the outside dimensions measuring 28” high by 26” wide by 26” deep. Internally, the desktop rack enclosure offers 12U of available rack space.
The IR28-04 front and rear doors feature two-point latching with locks and long-lasting dual durometer EPDM gasket. A tempered safety glass or polycarbonate window (17.2” Wide x 13.6” High with a 21.9” diagonal) can be installed on the 12-gauge steel front door. In addition, the doors can be easily removed by lifting the pins on the hinges.
“At ITSENCLOSURES, we strive to be the market leader for unique enclosure products and have been building durable enclosures since 1985. Our new, NEMA rated desktop rack enclosure will benefit manufacturing and industrial companies in need of protecting rack mountable equipment in rough, wet environments,” said JT Spangler, CEO of ITSENCLOSURES. “Time and time again, the inspiration for new products can be traced back to the immediate needs of our loyal customers. It is exciting to see how a simple idea can turn into a robust product, which will be used in factories and harsh environments across the country.”
The unit can be positioned on a desk, table, or under a workspace – the small footprint makes it perfect for limited space areas. Other mounting options include a vertically adjustable, bolt-down pedestal to create a proper height for users or an adjustable mobile pedestal to move the enclosure around a factory floor.
ITSENCLOSURES offers various beneficial rack enclosure accessories for its NEMA 4 enclosures. To easily route cables and wires, a watertight Roxtec cable entry gland can be installed on the rear or sides of the unit. Additional accessories include a 6-outlet surge protector, rack mountable shelving, USB connectors, and a solid front door. Thermal management options include a filtered fan system, vortex cooling unit, NEMA 4 heat exchanger, and various sizes of enclosure heaters.
“All of our IceStation products and accessories are heavily tested at our facility and are always assembled and ready to use upon delivery. Just plug and play,” Mr. Spangler added.
IceStation rack enclosure products are coated with a polyester powder paint finish and the IR28-04 desktop rack enclosure is available in blue, gray, or any custom color found on the RAL color chart.
Proudly ‘Made in the USA,’ ITSENCLOSURES’ products are designed and assembled at the ITSENCLOSURES warehouse in Mt. Pleasant, Pennsylvania – located 36 miles southeast of Pittsburgh.
For more information, visit the IR28-04 product page: Click Here
ITSENCLOSURES’ products allow companies to use computers, printers, keyboards, or monitors in the harshest of environments. IceStation enclosures will protect a company’s investment and maximize the lifetime of the electronics protected.
Four great reasons to choose ITSENCLOSURES: quality, delivery, service, and price.
For more information on ITSENCLOSURES and the large selection of innovative enclosures, visit www.ITSENCLOSURES.com, email firstname.lastname@example.org, or call 1-800-423-9911 to talk to an ITSENCLOSURES sales representative.
ITS Announces IO35-4X Computer Enclosure/in IceStation, Press Releases /by Matt
Mt. Pleasant, PA (February 18, 2020) For over 35 years, ITSENCLOSURES has been producing the most robust printer, monitor, and computer enclosure solutions on the market. Every IceStation product is made in the USA, built to last and protect, and will arrive assembled and ready to use; just plug & play.
The latest IceStation industrial computer enclosure is the IO352813-4X stainless-steel monitor/computer enclosure, which was designed specifically for the food, beverage, and pharmaceutical industries in mind. NEMA 4X enclosures will defend against dust, dirt, hose directed fluids, corrosive materials, and most weather conditions.
ITSENCLOSURES IO series enclosures are designed for use with flat panel monitors and thin client/small form computers. The computer enclosures are the perfect solution for limited space environments.
The NEMA 4X IO35 computer enclosure is formed and fully welded with type 304 stainless-steel and a vertical #3F finish. This enclosure features a built-in keyboard drawer to store a desktop or industrial keyboard and mouse. The roll-out keyboard tray – with two quarter turn compression latches – measures 3″ High by 22.62″ Wide x 9.88″ Deep.
The IO35-4X measures 35” High by 28” Wide by 12” Deep with a 25.5” diagonal window measuring 13.75” High by 21.5” Wide. ITSENCLOSURES offers tempered safety glass or polycarbonate window options for the front door. The stainless-steel door panel includes concealed hinges and two quarter turn screwdriver style latches (key locking latches are also available). A monitor sized up to 25-inches can be installed to the internal VESA mount, which is part of the vertical support bracket. The bracket is used to tip out and install the PC/monitor. The chassis includes a 100-cfm re-circulating fan.
“The IO35 is the modern brain-child of our sales team and engineering team with very valuable customer influence. I love that our employees work together to find workable solutions which resonate with our customers. This new stainless-steel IceStation product incorporates pieces of our best-selling products and I am quite pleased with the functionality of the enclosure,” stated JT Spangler, Owner of ITSENCLOSURES, “We will continue to develop and manufacture additional heavy-duty units throughout 2020. Our dynamic products continue to innovate and advance beyond our wildest expectations and we feel that solid growth is in our near future.”
For installation, the heavy-duty IO35-4X computer enclosure can be affixed to a wall with a mount, a stainless-steel bolt down pedestal, or a stainless-steel mobile pedestal with swivel castors, which can be locked into place. A Roxtec sealed cable entry gland can be installed – in various spots on the enclosure – for the ingress and egress of power cords, wires, and cables. ITSENCLOSURES also offers surge protectors, industrial keyboards, and thermal management options, like stainless-steel vortex heat exchangers for cooling or an electric thermal heater for refrigerated environments.
ITSENCLOSURES has two additional stainless-steel monitor/computer enclosures; the IO28-4X (measuring 28″ High x 26″ Wide x 8″ Deep) for a 22” monitor and the IO29-4X (measuring 29″ High x 28″ Wide x 12″ Deep) for a 25” monitor.
“Computers, printers, monitors, and other essential electronics are protected in our IceStation NEMA rated products. As we always say, our monitor, printer, and computer enclosures are built-to-last and we stand by that promise,” added Mr. Spangler.
IceStation by ITSENCLOSURES has over 3 decades of experience in successful printer, monitor, keyboard, and computer enclosure deployments and offers a wide variety of ‘built-to-last’ products.
For more information and to watch the product video, visit the IO35-4X product page
ITSENCLOSURES builds the strongest, NEMA rated computer enclosures, which are ideal for all environments where dust, dirt, and exposure to liquids or corrosives are present. The IceStation line of products allow the use of computers, printers, keyboards, and monitors in the harshest locations and will protect a company’s investment and maximize the lifetime of the electronics protected.
To learn more about ITSENCLOSURES, contact the Sales Department: 1-800-423-9911 –or– email@example.com
ITSENCLOSURES Introduces 55” Outdoor Digital Signage/in Outdoor Digital Menu Boards, Press Releases /by Sydney Patton
Mt. Pleasant, PA (April 8, 2019) – Since 2007, ViewStation by ITSENCLOSURES has been successfully manufacturing outdoor digital signage for various restaurants, museums, stadiums, and transportation sectors across the United States, Canada, and the Caribbean. To stay ahead of the competitive and ever-evolving digital race, ViewStation is introducing an all-new product – The ViewStation VS-6. The innovative system revolutionizes outdoor signage and is currently available in one screen or two screen configurations.
With a custom, built-to-last base, the sixth-generation digital signage is designed for a smooth and uncomplicated deployment. A customer would only need to run a 30-amp cord to the signage. The outdoor rated (IP56 certified) monitor offers protection against snow, rain, ice, and salty air. The VS-6 can be integrated into virtually any outdoor environment!
VS-6 Digital Signage Features:
“Our company has been installing digital signage across the United States, Canada, and even the Caribbean for over twelve years and our solutions continue to improve and advance,” said JT Spangler, President and Owner of ITSENCLOSURES, “Our latest generation is simply stunning! The 2,500-nit, high bright LCD monitor looks incredible outdoors in the sunshine. I can honestly say that it is impressive to view at any point in the day; morning, noon, and especially night.
The dynamic VS-6 digital signage has serviceability, behind the lockable rear door, for easy access to important assets, like the media player and surge protector. The monitor can easily be installed on the front of the heavy-duty mount.
ViewStation’s solution incorporates an outdoor monitor with a built-in, inaudible air moving system that allows functionality from -22° to 122° F, even in direct sunlight.
Mr. Spangler added, “Our new moto around the office is that ‘we bring videos to life’ outdoors. The goal is to continue to do so for many years to come. I still feel like digital signage is in its infancy.”
The 6th Generation digital signage is currently being tested on the outdoor ITSENCLOSURES test pad and will be ready for deployment across the country and around the world in the 2nd quarter of 2019.
ViewStation by ITSENCLOSURES has over a decade of experience in successful QSR deployments and offers a wide variety of digital signage board solutions.
For more information, visit the ViewStation VS-6 Product Page
ITSENCLOSURES Introduces NEMA 4 Printer Enclosure/in Press Releases, Printer Cabinet Enclosures, Printer Enclosures /by Sydney Patton
Mt. Pleasant, PA (January 9, 2019) – ITSENCLOSURES, the leader of American made industrial printer cabinets for barcode printers and desktop printers, has announced the latest product in a long line of high-quality printer enclosures: the PB282626-04, a NEMA 4 cabinet that protects and guards against dust, dirt, grease, hose directed water, and most weather conditions like rain and snow.
The printer enclosure is designed to shield desktop laser printers (such as Brother, Canon, HP, and Ricoh) and thermal transfer label printers (such as Zebra, Cognitive, Honeywell, and Intermec), on dusty, dirty, and wet factory floors. The PB28-04 enclosure is fabricated out of 14-gauge painted steel and the outside dimensions measure 28” high by 26” wide by 26” deep. The maximum printer dimensions, for the printer enclosure, are 18” high by 20” wide by 21” deep.
The PB28-04 front door features quarter turn knob-style compression latches and durable dual durometer EPDM gasket. The rear door is lockable and has a 22.0” high by 22.5” wide opening. The interior of the printer enclosure features an adjustable 20.2” extended sliding shelf, which provides effortless access to the printer for printouts, ink replacement, and label media loading. The sliding shelf is vertically adjustable and will support printers weighing up to 80 pounds.
JT Spangler, Owner/President of ITSENCLOSURES, is very enthusiastic when talking about the new printer cabinet assembly, “The PB28 printer enclosure was engineered and fabricated out of necessity from our customers. We have found much success with our NEMA 12 and NEMA 4X printer enclosures and desired to have a NEMA 4 option in our product offerings. The end product was exactly what I had in mind and we look forward to installing these in harsh environments – both indoors and outdoors.”
ITSENCLOSURES offers useful accessories for all of the desktop and printer enclosures, including a vertically adjustable bolt down or mobile pedestal to create a suitable height for users, sealed cable entry glands for various sizes of cables and wires, power strips, and thermal management, including a NEMA 4 heat exchanger or vortex cooling unit.
“Our state-of-the-art NEMA 4 enclosures are heavy-duty and will protect electronics in most settings, which makes them extremely versatile for our customers,” added Mr. Spangler.
The printer enclosure enclosure is available in blue, gray, or any custom color found on the RAL color chart.
Based on a customer’s printing applications, ITSENCLOSURES printer enclosures are also available with NEMA 12 (powder coated steel) and NEMA 4X (stainless steel) ratings.
Manufacturing and engineering heavy-duty enclosures for over three decades, ITSENCLOSURES fabricates the toughest cabinets in the industry and ships each product assembled and ready to use upon delivery. Every product is designed, and field tested in Mt. Pleasant, Pennsylvania – outside of Pittsburgh.
For more information, visit the PB28-04 product page
ITSENCLOSURES Introduces Desktop Rack Enclosure/in IceStation, Press Releases, Rack Mount Enclosures /by Sydney Patton
Mt. Pleasant, PA (June 29, 2018) – Designing and developing the most durable enclosures on the market, ITSENCLOSURES has announced another tough, heavy-duty enclosure: the IceStation IR262428-12, a NEMA 12 desktop rack enclosure.
The IceStation IR26 rack enclosure is designed to shield and protect rack mountable electronics in harsh and dirty factory facilities. The IR26-12 is fabricated out of 14-gauge painted steel (black powder coated) and measures 26” high by 24” wide by 28” deep.
The interior of the rack enclosure features front and rear mounting rails which are square punched for use with cage nuts. The total interior space is 12U, which is approximately 21” high.
The IR26 has lockable front and rear doors for protection from the elements and includes lift and turn compression latches. The front door of the rack enclosure includes a polycarbonate window.
JT Spangler, Owner and President of ITSENCLOSURES, understands the utter importance of enclosures in dusty, dirty manufacturing facilities, “If you are going to deploy expensive rack mountable equipment in a factory environment, vital electronics should be housed inside of a tough, NEMA rated rack enclosure. If the electronics are exposed to harmful elements, then they will most likely fail and cause serious and costly downtime. Our IR26 will keep powerful tools up and running for many years to come.”
The NEMA 12 IR26 rack enclosure protects against dirt, dust, splashing fluids, grease, lint, and destructive fibers in the air.
To easily route cables and wires, a dust-tight, water-tight Roxtec cable entry gland can be installed on the rear or sides of the unit. Additional accessories available, include a 10-foot power cord to run electricity into the inside of the box, a 6-outlet surge protector, rack mountable shelving, and a solid front door.
For thermal management, a filtered fan system will create positive pressure on the inside of the rack enclosure and prevent any harmful dust and dirt from entering the cabinet. For cooler environments, a thermostatically controlled heater can be added to maintain a desired temperature.
For additional flexibility, the IR26 can be installed on an adjustable stationary pedestal or an adjustable mobile pedestal.
“Our creative team is constantly working on generating rack enclosure solutions and accessories to meet the demand of the ever-changing industrial sector. We strive to design products that will protect distinct types and sizes of electronics in areas where electronics would not otherwise survive,” added Mr. Spangler.
ITSENCLOSURES manufactures the most durable electronics enclosures on the market and ships every product completely assembled and ready to use upon delivery. Every product is designed and fabricated in Western Pennsylvania, outside of Pittsburgh.
ITSENCLOSURES Introduces Printer Enclosure for Various Printers/in Press Releases /by Sydney Patton
Mt. Pleasant, PA (May 16, 2018) – ITSENCLOSURES, an innovator of durable, NEMA rated enclosures for industrial environments, is proud to announce another heavy-duty, IceStation enclosure: the PB262426-12, a NEMA Type-12 printer enclosure.
The ultra-modern product is designed to shield and protect label barcode printers, on harsh and dirty factory floors, including Zebra thermal transfer barcode printers. The PB26-12 enclosure is fabricated out of 14-gauge painted steel and measures 26” high by 24” wide by 28” deep. The maximum printer dimensions for the PB26-12 are 21” high by 20” wide by 22” deep.
The printer box has lockable front and rear doors for added security and protection from the elements and includes lift and turn compression latches. For customer customization, the front door includes a removable polycarbonate window, which is easily modified for a custom label slot or hinged printer door. The interior of the enclosure features an adjustable 22” extended sliding shelf, which provides easy access to the printer for label media loading. The sliding shelf can be adjusted vertically and will support barcode printers weighing up to 80 pounds. The shelf has an adjustable depth bracket to keep the printer in position.
The rear of the enclosure features a 10-foot power cord and a mini-split panel built into the door. To route multiple cables and wires, the Roxtec cable entry gland accessory can be added to the enclosure door or sides of the enclosure.
This printer enclosure can also be used for many desktop laser printers by installing an optional ‘access hinged printer door’ on the top of the unit to retrieve 8½” x 11” sheets of paper.
JT Spangler, Owner and President of ITSENCLOSURES, is thrilled to introduce another printer box enclosure, “Over the past few years, we have had enormous success with our printer enclosure line. The PB26, which is larger than our popular PB20 printer enclosure, provides customers with an alternative option for printer protection in a dirty plant or factory. We believe that this enclosure will have a significant impact on the thermal barcode printer industry.”
Based on a customer’s printing applications, ITSENCLOSURES are available with NEMA 12 or NEMA 4X ratings. The NEMA 12 IceStation printer boxes protect against dirt, dust, splashing fluids, grease, lint, and damaging fibers in the air. The NEMA 4X enclosure is ideal for wash down applications in the food processing and pharmaceutical industries. Numerous accessories are available for the PB26 printer box enclosure. The most popular accessory is the filtered fan system which creates positive pressure on the inside of the enclosure and prevents dust and dirt entry at the label access slot. A stationary or mobile pedestal is also available at varying heights. A hinged printer door that maintains a seal – until opened – allows an operator to retrieve labels quickly and efficiently. For freezer or cooler environments, a thermostatically controlled heater can be added to maintain temperatures.
“Our goal is to introduce various new products this year and we are happy to offer our customers multiple off-the-shelf solutions, which can ship out in only a couple days,” added Mr. Spangler.
Designing and engineering heavy-duty enclosures since 1985, ITSENCLOSURES manufactures the most durable electronics enclosures on the market and ships every product completely assembled and ready to use upon delivery. Every product is designed and fabricated in Western Pennsylvania.
For More Information, Visit the Product Page: Click Here
ITSENCLOSURES Introduces TITAN Dual Monitor Enclosure/in Press Releases /by Sydney Patton
Mt. Pleasant, PA (November 27, 2017) – A leader in the industrial enclosure market, ITSENCLOSURES engineers and builds the most durable, high-quality computer enclosures on the market. ITSENCLOSURES continues to add new products to the best-selling IceStation TITAN Family with the introduction of the TITAN dual monitor enclosure. The NEMA 12 dual monitor enclosure protects against dust, dirt, grease, fibers in the air, and splashing fluids.
Designed specifically to house two 27” widescreen monitors side by side, the dual monitor (ID21542-12) enclosure body is constructed out of heavy-duty 14-gauge welded steel and 12-gauge door thickness. The enclosure stands at 21” high x 54” wide x 12” deep and the finish is a polyester powder paint available in blue, gray, or any custom color found on the RAL color chart.
The large 13.45” high x 49” wide viewing window is hinged at the bottom and easily folds down to accept two (up to 27-inch) 16×9 wide screen monitors in landscape orientation. For stress-free installation, adjustable VESA mounts are included. Utilizing OEM stands, the displays can also be placed on the flat surface below the mount. A removable rear plate (15” high x 29.5” wide) makes it easy to quickly install the suitable monitors. Customers have a choice between a tempered safety glass or a polycarbonate viewing window.
“In 2017, ITSENCLOSURES introduced two new enclosures to the popular and versatile TITAN family of pc enclosures,” said JT Spangler, President of ITSENCLOSURES. “The innovative dual monitor enclosure derived from the IceStation TITAN Hammerhead enclosure. Due to the overwhelming popularity of the Hammerhead enclosure, it was a natural progression for ITS to modify this product for customers that did not require the full freestanding enclosure.” Spangler continued, “The dual monitor enclosure is ideal for space saving applications, because the enclosure can sit on a desk or mount to the wall. We are extremely pleased with how this rugged product came together and are excited to formally introduce it to our customers. ”
Thermal management options, available for the dual monitor enclosure, include a filtered fan system and vortex cooling unit. Either thermal management system will keep the equipment running smoothly in mission critical environments.
“ITSENCLOSURES plans to introduce new products to the market in 2018, including a new line of label printer enclosures,” added Mr. Spangler. “Our business model has always been to protect electronics in any environment, in turn helping companies realize the maximum life cycle of their equipment.”
The NEMA 12 enclosure can be customized with various accessories, including two waterproof USB connectors for a keyboard or scanning device, sealed cable entry gland, a 6-outlet surge protector, a 10-foot power cord, or an industrial keyboard and mouse.
Proudly ‘Made in the USA,’ ITSENCLOSURES ships every product completely assembled and ready to use upon delivery!
To visit the Dual Monitor Enclosure Product Page – Click Here
To learn more about ITSENCLOSURES, please call 1-800-423-9911 –or– email firstname.lastname@example.org
Chefette, Barbados Restaurant, Installs Digital Signage Menus/in Press Releases /by Sydney Patton
Mt. Pleasant, PA (September 29, 2017) – As ITSENCLOSURES continues to fabricate and deploy digital signage throughout the United States and abroad, a returning customer, Chefette Restaurants, recently added more outdoor digital signage menu to its chain of quick service restaurants.
Originally founded in 1972, Chefette Restaurants, the largest quick service restaurant in the Caribbean island nation of Barbados, operates 15 locations across the island of Barbados and employs over 850 people. Chefette deployed its first round of digital signage in the first quarter of 2013 at 10 drive-thru locations. The deployment included indoor and outdoor digital signage in portrait orientation and consisted of a mix of triple screen outdoor menu boards and single display pre-sale digital boards, both with 46-inch high-bright monitors. Because of the heat (average temperature is 80° F) and humidity that exists on the island, the outdoor LCD enclosures required air-conditioners installed on the rear of each unit.
The grand opening of Chefette’s brand-new location in Lancaster was September 15th, 2017. The company’s website noted “Chefette’s newest branch is located in Lancaster, St. James, just off Highway 2A. This beautiful facility expands upon the modern designs seen at our Warrens and Welches branches and features a drive-thru, Double MEGA 3-Story Playground and ice cream parlor.” According to the news article, ‘Barbados needs Chefette now more than ever,’ the new location “sits on over 8,000 square feet of land, can seat about 170 people and offers parking space for about 40 vehicles.”
Chefette’s Lancaster store deployed a single and triple screen digital signage menu board paired with 47-inch high bright monitors. Utilizing the latest technology, ITSENCLOSURES’ fan cooled digital menu boards boast a 66% energy consumption reduction, compared to the compressor based enclosures originally installed in 2013. Each enclosure is branded with the company’s logo and powder coated in the company’s signature color purple. Since the original deployment in 2013, ITSENCLOSURES’ new generation of outdoor digital menu boards are thinner, sleeker, and more energy efficient. To reduce frequent enclosure maintenance, the menu boards employ a hydrophobic air filter to keep out dust and dirt, and only need to be replaced every 3-5 years. Chefette also installed commercial grade 48-inch monitors indoors to serve as menu boards and promotional tools.
“Chefette has been a loyal digital signage customer for years and we are proud to have our outdoor digital menu boards at the chain’s drive-thrus, including the new Chefette store in Lancaster,” said J.T. Spangler, President and Owner of ITSENCLOSURES. “The new location looks inviting and modern. Chefette does an excellent job with the architectural design and feel of each location. ITSENCLOSURES is proud to be the exclusive provider of digital menu boards to Chefette. We look forward to working with them on future projects!”
ITSENCLOSURES designs and builds the most heavy-duty enclosures on the market and ships every product completely assembled and ready to use upon delivery.
For more information on ITSENCLOSURES and their wide array of innovative products, please email ITSENCLOSURES (email@example.com) or call 1-800-423-9911 to speak to a sales specialist.
ITSENCLOSURES Adds More Digital Signage at OSU/in Press Releases /by Sydney Patton
Mt. Pleasant, Pa (August 30, 2017) – With a proven digital track record for over a decade, ITSENCLOSURES continues to deploy outdoor digital signage across the United States, Canada, and the Caribbean. The most recent installation occurred, this month, at Ohio Stadium, the home of the Ohio State Buckeyes.
The project took approximately 8 months from start to finish. In December of 2016, The Ohio State University (OSU), located in Columbus, Ohio, contacted ITSENCLOSURES regarding a potential new project for the university’s football stadium. OSU received the necessary funding for the digital signage project in the first quarter of 2017. With competition from two other enclosure manufacturers, ITSENCLOSURES won the business and secured the project based on cost, enclosure quality, and a previous successful relationship.
The digital signage project consisted of 28 passively cooled/vented ViewStation LCD enclosures that house 79-inch monitors. The majority (26) of the enclosures are mounted back-to-back on an I-beam to display game statistics in real time. Two additional enclosures are mounted to the wall. With the 28 recently installed enclosures, Ohio State University now has over 200 ITSENCLOSURES’ LCD enclosures mounted throughout the football stadium.
Before the units were fabricated, ITSENCLOSURES’ engineering team worked hand and hand with OSU to provide the necessary weights and loads of the enclosures. This data was needed to apply for the permits to install the lcd enclosures, in the stadium, prior to the 2017 football season. For fan protection and as a precaution against vibration, OSU installed safety chains attached to the I-beams for the dual-sided enclosures.
With football season right around the corner, the enclosures were installed the second week of August 2017. The first home game will take place on Saturday, September 9th against the Oklahoma Sooners.
JT Spangler, the President and Owner of ITSENCLOSURES, said, “We love having our company’s enclosures installed at such a storied and respected football venue. The home of the OSU Buckeyes is one of the largest football stadiums in America. It is very humbling to know that our digital signage enclosures will be seen by over a hundred thousand football fans on Saturday’s this Fall. Our team could not be prouder with this particular enclosure project. It shows how ITSENCLOSURES and The Ohio State University can come together to engineer and fabricate a quality product that will endure for many, many seasons to come.”
The durable enclosures are shielded from any direct weather exposure, so ITSENCLOSURES was able to provide a vented LCD enclosure solution. The enclosure window is constructed out of an anti-glare, polycarbonate material.
The new digital signage screens replaced old, static game boards that displayed statistics for the fans.
Mr. Spangler continued, “Over the past few years, we have installed digital signage at various locations across Columbus, Ohio, and we are excited to continue our relationship with Ohio State University. Repeat customers know that they will be receiving heavy-duty enclosures that will protect the sensitive electronics that are housed inside.”
According to OhioStateBuckeyes.com, “Ohio Stadium is the fourth largest on-campus facility in the nation. Since the opening game against Ohio Wesleyan on October 7, 1922, more than 36 million fans have streamed through the stadium’s portals. Ohio Stadium is listed in the National Registry of Historic Places.”
During the football season, ITSENCLOSURES plans on following up with Ohio State to retrieve first-hand reaction from fans about the new signage.
For more information on ITSENCLOSURES’ large array of products, visit www.ITSENCLOSURES.com, send an email to firstname.lastname@example.org, or call 1-800-423-9911.
ITSENCLOSURES Introduces InfoStation Kiosk/in Press Releases /by Sydney Patton
Mt. Pleasant, PA (May 31, 2017) – For over three decades, ITSENCLOSURES (Integration Technology Systems) has been engineering and manufacturing digital signage enclosures for customers. ITSENCLOSURES is excited to introduce the latest revolution in touchscreen kiosk technology, the ‘InfoStation’ Interactive Touchscreen Kiosk. The heavy-duty kiosk solution is meant for indoor use and features a free-standing base.
From wayfinding, to directories, to up-to-the-minute social media, to functional web pages, the InfoStation interactive digital signage is a versatile tool to bring information to consumers.
The InfoStation touchscreen kiosk package includes an ADA compliant kiosk with a heavy-duty base, a Windows based media player with wireless web for real-time data, a 42-inch ELO projected capacitive touchscreen, interactive digital signage software provided by ConnectedSign – a digital signage content provider, and a one year annual maintenance and software support system.
JT Spangler, President of ITSENCLOSURES, explains the importance of kiosks in the marketplace, “The InfoStation includes a freestanding kiosk with an interactive touchscreen to enhance a company’s overall marketing and data portfolio. It is slick. With our digital kiosk, a company can update content easily and quickly, and keep information fresh and interesting to users. Animations, videos, imagery, and colorful graphics will make your company stand out from the crowd. Deploying the InfoStation kiosk in a lobby or meeting room will quickly illustrate that the company is at the cutting edge of technology.”
The InfoStation is sturdy and is constructed of welded steel with a black powder coat finish. The rear panel can be effortlessly removed to access the media player, which resides on an internal shelf in the kiosk pedestal base. Cable exit holes are included in the bottom rear for easy cable management. The base and pedestal are coupled together with a 6” by 6” mounting pattern.
This modern, digital marketing display is easily applied to a multitude of applications including museums, restaurants, gas stations, casinos, convention centers, airports, hospitals, shopping malls, train stations, classrooms, libraries, theaters, conference rooms, schools, universities, hotels and resorts.
Mr. Spangler concluded, “We are very proud of this digital signage solution. The new InfoStation kiosk can be used in an endless array of industries and companies. I look forward to seeing this product deployed all over the country.”
Additional customization is available, including custom colors from the RAL color chart and logo branding for a small charge.
To learn more about ITSENCLOSURES, please contact: Jennifer Bissell, Director of Sales & Marketing, 1-800-423-9911 –or– email@example.com
Visit the InfoStation product page: Click Here
ITSENCLOSURES Introduces Dual Monitor Computer Enclosure/in Industrial Enclosures, Press Releases /by Sydney Patton
Mt. Pleasant, PA (April 26, 2017) – For over three decades, ITSENCLOSURES (Integration Technology Systems) has been engineering and fabricating the most heavy-duty computer enclosures on the market. ITSENCLOSURES continues to add to the popular TITAN family with the introduction of the Hammerhead – the new dual monitor NEMA 12 freestanding computer enclosure. The ‘Hammerhead’ dual monitor enclosure protects against dust, dirt, grease, and splashing fluids.
With the ability to store two 27” widescreen monitors side by side, the TITAN Hammerhead’s (IS615427-12) enclosure body is constructed out of 14-gauge welded steel and 12-gauge door thickness, and stands 61” high x 54” wide (bottom portion is 29.5” wide) x 27” deep. The dual monitor enclosure finish is a polyester powder paint available in blue, gray, or any custom RAL color.
The 49” wide x 13.45” high viewing window is hinged at the bottom and easily folds down to accept two (up to 27-inch) 16×9 widescreen monitors in landscape orientation. Adjustable, VESA mounts are included for easy installation. The displays can also be placed on the flat surface – below the mount – utilizing OEM stands. A removable rear plate (15” high x 29.5” wide) makes it easy to quickly install the suitable monitors. Customers have a choice between a tempered safety glass or a polycarbonate viewing window.
The dual monitor enclosure doors feature lift and turn style key lockable latches and dual durometer EPDM gasket for additional protection against a harsh environment. The lower rear door measures 30.65” high and is ideal for accessing the back of electronics stored in the enclosure. The bottom half of the TITAN provides plenty of space to house a computer, printer, UPS, power supply, and additional important electronics. An adjustable, vented shelf, attached to uni-strut, is also included for placement of electronics.
“ITSENCLOSURES is excited to, once again, introduce another product to the TITAN family of industrial computer enclosures,” said JT Spangler, Owner & President of ITSENCLOSURES. “Customer feedback warranted the Hammerhead product, as manufacturers and system integrators sought a cabinet with the ability to house two monitors within one enclosure. The Hammerhead creates a revolutionary workspace for factory and industrial settings. We are excited to see this product on manufacturing floors across the globe. Every product sold is designed and manufactured with a commitment to quality and satisfaction.”
A sloped work surface, with raised ledge, provides a useful area for important documents, file folders, and writing utensils. Beneath the work surface is a retractable keyboard/mouse drawer. The drawer is lockable and the front folds down to provide an ergonomic wrist rest. When completely extended, the drawer measures 22.7″ wide x 9″ deep x 3.5″ high.
Swivel casters are a standard feature. When the computer enclosure is in its desired location, the front casters lock into place with a foot brake. For areas that require a stationary workstation, bolt down legs can be installed on the enclosure.
Various thermal management options are available for the TITAN Hammerhead, including a filtered fan system, air conditioners (ranging in size from 2,000 – 6,000 BTU), heat exchanger, and vortex cooling unit. If additional airflow is required between the two halves of the Hammerhead, a recirculating fan can be installed in a pre-cut hole below the monitors.
Customize the NEMA 12 enclosure with numerous accessories, including sliding shelf brackets for the vented shelf, waterproof USB connectors for scanning devices, hinged printer door for a barcode printer, 19” wide adjustable rack mount rails, 6 outlet surge protector, 10-foot power cord, and industrial keyboards or hula points.
Always proudly ‘Made in the USA,’ ITSENCLOSURES ships every product completely assembled and ready to use upon delivery at the plant or manufacturing facility!
For more information on ITSENCLOSURES and their wide array of innovative products, please email ITSENCLOSURES(firstname.lastname@example.org) or call 1.800.423.9911 to speak to a salesperson.
Visit the TITAN HAMMERHEAD product page: Click Here
ITSENCLOSURES Deploys Digital Signage at Funeral Home/in Press Releases /by Sydney Patton
Mt. Pleasant, PA (February 28, 2017) – ITSENCLOSURES, a digital signage hardware expert, installed an all-weather, LCD enclosure at the front entrance of The Frank Kapr Funeral Home. The digital signage displays brief obituaries with visiting hours and also announcements/events.
Frank Kapr Funeral Home, located on West Pittsburgh Street in Scottdale, Pennsylvania, has been in operation for over 6 decades. Wanting to take advantage of the flexibility of digital signage to instantly change and revise content, the funeral home installed a consumer grade, residential, HDTV to present obituaries and announcements. The indoor monitor was mounted outdoors on the front porch railing, but was not a ‘high bright,’ commercial monitor. For this reason, it was nearly impossible to see during the day.
Frank Kapr desired to use the digital signage around the clock, and the residential television posed a problem. After struggling to use the current system, the funeral home turned to ITSENCLOSURES for direction on a more robust solution. For over a decade, ITSENCLOSURES has designed and installed outdoor, all-weather lcd enclosures across the United States, Canada, and the Caribbean. Several factors were considered, including the overall display visibility and harsh, Western Pennsylvania weather conditions.
After meeting with ITSENCLOSURES to discuss digital signage options, Frank Kapr chose an enclosure – in portrait orientation – that included a 46” high bright LCD (1,500 nits), and a specific heating and cooling system to allow operation 24/7 in temperatures of -40° to 120°F. To quickly modify content on an hourly or daily basis, a media player is hard-wired to a computer in the funeral home’s main office.
Frank Kapr, Owner of The Frank Kapr Funeral Home, was pleased with his decision to utilize digital signage at his funeral home, “We wanted state-of-the-art signage for our funeral home… something that could be seen from a distance. Our first step was to contact Shannon Roberts, who is the Production Manager at ITSENCLOSURES. He took the time to explain everything clearly to us and helped us make the best decision for our needs.”
After reviewing various locations on the funeral home’s grounds, the enclosure was installed on a cement footer in the flower garden at front of the building and can be seen by those walking or driving past the building. It is surrounded by flowers and greenery, making it an eye-catching addition to the funeral home. Frank Kapr also chose to have the funeral home’s logo silk screened in 3 locations on the enclosure for personal customization and brand awareness.
JT Spangler, Owner and President of ITSENCLOSURES, was proud that his company’s digital signage would be used to honor those that had passed away, “Digital signage is often installed for advertising and promotion, so I was proud to see our product employed in a unique way at the funeral home. The Frank Kapr Funeral Home is a fixture in the town of Scottdale, Pennsylvania, and they give back by using the LCD enclosure to display area events. This is just one more example of how digital signage can be a very versatile product.”
The Frank Kapr Funeral Home has a park on the property, called the Family Gardens, with a soothing waterfall, fountain, and statue. The all-weather LCD enclosure announces musical entertainment in the park. Singers, instrumentalists, and bands are provided free of charge to the public.
Mr. Kapr continued, “We are ecstatic about all that our attractive sign is capable of doing and we are continually finding new things to try with the sign. It is the right size for the exterior of the funeral home and the messages can be read from a distance. We are happy with our investment and every dollar was well spent. Mr. Roberts and ITSENCLOSURES are a wonderful digital partner.”
For more information on ITSENCLOSURES’ large array of products, visit www.ITSENCLOSURES.com, send an email to email@example.com, or call 1-800-423-9911 to speak with Jennifer Bissell, Director of Marketing.
For more information on other enclosure products by ITSENCLOSURES: Click Here
ITSENCLOSURES is Exclusive Salad Bar Kiosk Provider for Jason’s Deli/in Press Releases /by Sydney Patton
Mt. Pleasant, PA (February 7, 2017) – In 2013, ITSENCLOSURES began deploying salad bar ordering kiosks at Jason’s Deli restaurants across the country. The stand is designed around Jason’s Deli’s existing ‘Point of Sale’ system and provides ease of use for customers to order a salad with all of the fixings, various drinks, and hot soup. Jason’s Deli, a gourmet sandwich shop with wholesome ingredients and a large salad bar, serves fresh and hearty food in over 260 delis in 29 states.
In the summer of 2013, Jason’s Deli contacted ITSENCLOSURES to discuss the design and fabrication of a one-of-a-kind unit, for the company’s popular salad bar, to house the restaurant’s point of sale terminal and small receipt printer.
ITSENCLOSURES developed a custom freestanding kiosk that features a sliding shelf for the printer and lockable front door for additional security. Jason’s Deli purchased a prototype for evaluation. After the initial installation was implemented successfully, Jason’s Deli began deploying units in restaurants across America.
“Jason’s Deli is one of our many success stories. ITSENCLOSURES’ engineering team always produces products that are both functional and protective. LCD enclosure products can be custom engineered for any customer’s unique needs. We pride ourselves on our knowledge of enclosure design and will continue to innovate with our solutions,” said JT Spangler, President of ITSENCLOSURES.
The POS (point of sale) system, mounted on the front of the stand, features a touchscreen display, credit card reader and a receipt printer, enabling customers to pay right through the point of sale system. Customers have the ability to order salad, soups, drinks, and other healthy food items.
Madison Boozer, Media Relations Manager at Jason’s Deli, stated, “The salad bar is our most popular menu option. Because the guest picks up a plate and makes their own salad, there are no modifications available on this entrée, which makes it easy to order with the touch of a button. Adding the kiosk to the salad bar was helpful to the customer and sped up the order process for customers during the lunch and dinner rush.” Boozer continued, “The kiosk allows guests – who would like the salad bar – to skip the line, letting them enjoy their meal at their own pace.”
The stands are installed at Jason’s Deli restaurants throughout the United States (15 states to date), including locations in Chicago, IL, Omaha, NE, Cranberry Township, PA, Jacksonville, FL, Austin, TX, and Hampton, VA. In all, ITSENCLOSURES has deployed the system to over 70 locations and this list continues to grow. Jason’s Deli plans to install additional units at new store builds and remodels opening in 2017 and beyond.
ITSENCLOSURES designs and builds the most durable electronic enclosures on the market and ships every one of its products completely assembled and ready to use upon delivery.
For more information on ITSENCLOSURES’ large array of products, visit www.ITSENCLOSURES.com, send an email to firstname.lastname@example.org, or call 1-800-423-9911 to speak with Jennifer Bissell, Director of Marketing.
For more information on other enclosure products by ITSENCLOSURES: Click Here
New Website Introduced at ITSENCLOSURES/in Press Releases /by Matt
Mt. Pleasant, PA (September 30, 2019) – For over 34 years, ITSENCLOSURES (also known as, Integration Technology Systems) has been revolutionizing the enclosure market with the most durable and inventive computer, monitor, printer, server, and electronic enclosures.
ITSENCLOSURES just announced the launch of the company’s new, mobile friendly website, www.itsenclosures.com, which provides customers with a brand new experience. While the URL remains the exact same, the website has a renewed look and clean feel with easier navigation on any computer browser, tablet, or phone. The NEMA 12 IceStation TITAN is just one of the many products that makes a big splash on many of the site’s updated pages.
JT Spangler, Owner and President of ITSENCLOSURES, loves how the new site functions and is excited to start collecting quote requests, “Our website is now easier to navigate with updated content and forms. The ITSENCLOSURES team studied and evaluated how customers interacted with our homepage and product pages and we hope that everyone will see a huge difference in how user friendly the site has become. Our plans are to continually refine our web presence, so our site continues to be a useful resource for our current and prospective customers.”
Since the site’s launch at the beginning of the month, the ITSENCLOSURES team has had an overwhelmingly positive response from users of the website. Customers can keep up to date with various product announcements, monthly blogs, and videos showcasing our products features.
“I love to see informative videos, large high resolution pictures, and bold colors and fonts. Our site really stands out when compared to other enclosure manufacturers and I hope that people will take notice and visit often. The overall goal is to grow our business and I believe that this new site will help us in that exciting endeavor.” added Mr. Spangler.
Visit the site, www.ITSENCLOSURES.com and see for yourself!
Located Southeast of Pittsburgh in Mt. Pleasant, Pennsylvania, ITSENCLOSURES designs and builds the toughest industrial enclosures on the market. ITSENCLOSURES’ large line of enclosures protect a company’s investment and maximize the lifetime of the electronics protected. ITSENCLOSURES’ products are always ‘Made in the USA’ and allow companies to safely use any electronics in the harshest operating environments. ITSENCLOSURES has been helping companies protect technology investments and realize the maximum life cycle of their equipment since its founding in 1985.
To learn more about ITSENCLOSURES, contact the Sales Department: 1-800-423-9911 –or– email@example.com
ITSENCLOSURES Celebrates 30 Years of Enclosure Protection/in Press Releases /by Matt
Mt. Pleasant, Pa (May 29, 2015) — ITSENCLOSURES is proud to announce its 30th year in business. When ITSENCLOSURES first started in 1985, the median home price was about $72,000, ‘The Cosby Show’ was #1 in the Nielsen ratings, and movie theaters were packed with crowds wanting to go ‘Back to the Future’ with Michael J. Fox, Christopher Lloyd, and Lea Thompson. ITSENCLOSURES has come a long way from those early days, but they have never given up on their one true goal, “To safely enclose electronic devices in any environment, protecting them from harsh surroundings, making them more powerful tools, extending their useful life, and above all else, protecting the customer’s processes from costly and unnecessary downtime.”
“Each and every day, everyone at ITSENCLOSURES strives to deliver the most innovative and highest quality products to our strong base of customers,” said JT Spangler, CEO and President of ITSENCLOSURES. “At ITSENCLOSURES, we strive to make our customer service the best asset that we can offer. Our products speak for themselves and our employees consistently work to keep every customer happy with their enclosure purchase, whether big or small. Obviously, we want every customer to be repeat customers.”
For over 30 years, ITSENCLOSURES has been expertly creating and constructing the toughest and strongest electronic enclosures on the market. The large line of NEMA rated PC enclosures are ideal for any setting where dust, dirt, grease, liquids or corrosives are present. ITSENCLOSURES’s advanced products, such as IceStation, NetStation, and ViewStation have become synonymous with the utmost excellence in the enclosure industry.
In the past six months, ITSENCLOSURES has added exciting new products to their already successful line, including the stainless steel IceStation TITAN – NEMA 4X and ViewStation’s Fan Cooled Outdoor Digital Menu Boards for the Quick Service Restaurant Industry, which boasts a 66% energy consumption reduction, compared to compressor based solutions.
“At ITSENCLOSURES, we feel that digital menu boards are the future of not only our company, but the future of quick service restaurant drive-thrus across the country and around the world,” Mr. Spangler explained. “They are vibrant, eye-catching, and can increase efficiency both in customer ordering and in thermal management. Plus, a quick service restaurant’s sales can increase by 8% at the drive-thru, when utilizing digital menu boards. We are thrilled to offer these proven and heavily tested products.”
ITSENCLOSURES plans on adding fresh and ground-breaking products to the marketplace this year and for countless years to come. Through many years of experience, the staff knows that the company must continue to be state-of-the-art to be ahead of the curve.
“Inventiveness will always be our #1 goal for the future and our pledge is to always provide the finest, fastest and most flexible service available,” Mr. Spangler exclaimed. “We know that our products are the best and we will constantly work to get that central message out to the masses.”
Located 36 miles southeast of Pittsburgh in Mt. Pleasant, Pennsylvania, ITSENCLOSURES has been designing and building the toughest computer enclosures you can find. Their NEMA rated PC enclosures are ideal for any and all environments where dust, dirt and exposure to liquids or corrosives are present.
Their line of computer enclosures, printer enclosures, server enclosures, network enclosures and electronic enclosures protect your investment and allow you to maximize the life of your electronics. ITSENCLOSURES’ products are always ‘Made in the USA’ and allow companies to safely use any computer or monitor in the harshest operating environments. The company has been helping companies protect their technology investments and realize the maximum life cycle of their equipment since its founding in 1985.
For more information on ITSENCLOSURES and their wide array of innovative products, please email ITSENCLOSURES directly (firstname.lastname@example.org) or call 1-800-423-9911 to speak to a salesperson.