Mt. Pleasant, PA (December 2, 2022) – With almost four decades of expertise in the industrial enclosure market, ITSENCLOSURES is pleased to showcase one of their popular rack enclosures: the NEMA 12 IceStation IR72-12. This heavy-duty rack enclosure is designed to enclose various electronics and rack mount equipment. The IR72 enclosure measures 72” high x 24” wide x 38” deep and is constructed out of heavy-duty 12-gauge steel with 16-gauge steel side panels. In order to bolt together multiple units, the enclosure’s side panels (sealed with gasket) can be removed.

For rack mounting applications, the IR72 comes with 19-inch wide adjustable, mounting rails; customize with square punched or tapped rails. The IR72 has 38U of interior rack mount space and the rails attach to the rack enclosure’s built in uni-strut. The rack mounts rails are installed in the front and rear of the cabinet and feature an adjustable depth to allow proper equipment positioning. Dust-tight split panels are located on the top and bottom of the enclosure to run cables, cords, and wires of varying sizes.

The IR72’s front and rear doors can be locked – for security – with key locking 3-point latches. The full view window (on the front door) is ideal for equipment monitoring and offered in tempered safety glass or Lexan polycarbonate. The front and rear doors feature reversible hinges to increase placement flexibility.

JT Spangler, Owner of ITSENCLOSURES, discusses ITSENCLOSURES’ industrial enclosures, “Our goal has always been to supply our customers with tough, protective enclosures for any harsh environment. Our NEMA 12 enclosures will protect your essential electronics from dust, dirt, grease, lint, fibers, and splashing fluids. Each and every day, we continue to design, tweak, and fabricate innovative enclosure solutions as electronics, computers, printers and monitors evolve. ‘Forever and a day’ is the standard that we have set for ourselves since the very early days of ITSENCLOSURES. This will never change.”

Easily transport the rack mount enclosure around the factory floor with the included industrial grade casters. The front casters are lockable and the rear casters swivel. Lifting eyes, mounted on the top of the rack enclosure, can also be used to move the enclosure. For those companies that require the enclosure to be stationary, anti-tip legs or bolt down legs are available.

Thermal management options include a 200 CFM filtered fan system (2 complete systems can be installed easily), which will keep air flowing throughout the enclosure. The fan and exhaust will create a positive pressure, which eliminates damaging dust and dirt from entering the enclosure. Other thermal management options include different sizes of air conditioners, a vortex cooling unit, or a NEMA 12 heat exchanger.

ITSENCLOSURES designs and builds the most durable rack enclosures on the market and ships all of their innovative products completely assembled and ready to use upon delivery.

For more information on ITSENCLOSURES and their large array of industrial products, visit www.ITSENCLOSURES.com, send an email to info@itsenclosures.com, or call 1-800-423-9911 to talk to an ITSENCLOSURES sales representative.

The post Product Spotlight: Rack Enclosure IR72-12 appeared first on ITSENCLOSURES.

Mt. Pleasant, PA (December 10, 2021) – With over 35 years of enclosure experience, ITSENCLOSURES carries various rack enclosures, including the IR40-12 Rack Mount Enclosure. Constructed out of heavy-duty 12-gauge steel (frame and doors), the rack enclosure measures 40” High by 24” Wide by 42” Deep, making it one of the deepest enclosures in the ITSENCLOSURES line of products.

The IR40-12 is perfect for various industrial and factory settings and is equipped with 19-inch wide, fully-adjustable mounting rails with 20U (35 inches) of interior rack mount space. The front door (opening 19.5″ x 35″) features a full view glass window and both the front and back doors have two key locking latches. A fastener secured split entry panel on the bottom and top of the enclosure allows for dust tight cable/cord/wire entry.

The durable side panels are constructed out of 16-gauge steel and can be removed, in order to join together multiple IR40 enclosures. With industrial grade casters, the IR40-12 can be positioned on the manufacturing floor with ease. Need to secure the cabinet to the floor? Bolt down legs are available to be installed in place of the casters.

According to JT Spangler, Owner/President of ITSENCLOSURES, innovative industrial products make ITSENCLOSURES stand out from the crowd, “We are not surprised that our industrial products, like the IR40 rack mount enclosure, sell quite well every year. They are one of our best enclosures and the name ‘ITSENCLOSURES’ continues to resonate amongst our customers. IceStation products are always tough and built to last for many years. Computers, peripherals and any other vital electronics are carefully protected in our products.”

Thermal management options include a filtered fan system, which can be installed in various places on the rack enclosure. The fan and exhaust have positive pressure that will eliminate harmful dust and dirt entry. A NEMA 12 heat exchanger, which contains two 4-inch, 100 circulating fans, is another viable option. For warmer environments, air conditioners or a vortex cooling unit are available to help create the perfect temperature to successfully operate servers, uninterrupted power sources (UPS), and other electronics.

Customize the IR40 with fixed or sliding shelves, cable management, a power cord, and rack mountable power strips.

NEMA 12 enclosures protect against dust, dirt, lint, fibers, grease, and splashing fluids, which are prevalent in most manufacturing settings. ITSENCLOSURES skillfully designs and builds the most durable electronics’ enclosures on the market and ships every product completely assembled and ready to use upon delivery. All products are made in the USA.

For more information about ITSENCLOSURES and their large array of products, visit www.ITSENCLOSURES.com, email info@itsenclosures.com, or call 1-800-423-9911 to talk to an ITSENCLOSURES sales representative.

For more information on the IR40 or a free quote, visit the IR40 Product Page.

The post Product Spotlight: Rack Mount Enclosure IR40 appeared first on ITSENCLOSURES.

Many companies utilize a server room to house important network equipment. Finding the perfect rack mount enclosure does require some thorough research. Identifying and understanding the following 3 considerations will help to make a well-informed decision on the best rack enclosure for the job.

3 Helpful Tips to Find the Perfect Rack Enclosure:

Space
Is the room – that the enclosure(s) will reside – physically large enough to install the intended rack enclosure? Make sure the room has sufficient clearance to set up the rack. As a rule of thumb, you will need at least 2-3 feet in the front and 2-3 feet in the back of the rack, so equipment can be easily accessed, and the doors have space to swing open. Most racks are around 36-38” deep, so account for approximately 8 feet of depth in the desired installation location. A rack enclosure should never be pushed against a wall. Also, be sure to account for space above the enclosure. Ample space from the top of the enclosure to the ceiling is necessary for proper air flow and routing cables overhead.

Environment
Do you have a clean room or dirty/dusty environment? Many server rooms are coined as “clean” rooms and are secluded from the factory floor. Clean rooms are generally air conditioned and maintained at a cool temperature. According to the website, WhatIs.com, “A clean room is an enclosed space in which airborne particulates, contaminants, and pollutants are kept within strict limits… In addition, the temperature and humidity may be controlled.” These types of applications are best suited for a vented rack enclosure. However, not all rooms are created equal! Some installations will require a NEMA 12 enclosure to keep dust, dirt, lint, grease, and splashing liquids away from electronics. In certain instances, specifiers may require a NEMA 4 or NEMA 4X rack to protect against a heavy washdown or harsh chemical cleaning.

Cooling
When contained in an enclosure, electronics will produce heat. It is critical to specify the correct cooling system prior to making any purchasing decisions. Filtered fans, a vortex cooling unit, heat exchangers, and air conditioners are all possible cooling solutions available for installation on server rack enclosures. Always make sure that the required cooling unit will fit on or in the enclosure. And, if installing a cooling system that has a filter, it is important to change or clean the filter regularly. According to the Energy Star website, “At a minimum, change the filter every [few] months. A dirty filter will slow down air flow and make the system work harder … wasting energy. A clean filter will also prevent dust and dirt from building up in the system — leading to expensive maintenance and/or early system failure.” Also, if you are tight on space, inquire if the room permits ducted cool air to be directed to the enclosure and, if so, clearly locate air intakes and exhausts near the equipment.

To ensure project success, perform the proper homework. Before purchasing an enclosure, be sure that essential elements, like thermal management, are evaluated. You do not want to purchase expensive electronics and have them fail, because the enclosure did not properly protect. Also – make sure that the necessary equipment will fit inside of the enclosure and that the correct NEMA rating is met!

HAVE QUESTIONS? LET US KNOW HOW WE CAN BEST ASSIST YOU! CONTACT AN ‘ITSENCLOSURES EXPERT’ AT 1-800-423-9911 -or- SEND US AN EMAIL:  INFO@ITSENCLOSURES.COM

The post 3 Considerations When Installing a Rack Enclosure appeared first on ITSENCLOSURES.

Mt. Pleasant, Pa (May 29, 2015) — ITSENCLOSURES is proud to announce its 30^th year in business. When ITSENCLOSURES first started in 1985, the median home price was about $72,000, ‘The Cosby Show’ was #1 in the Nielsen ratings, and movie theaters were packed with crowds wanting to go ‘Back to the Future’ with Michael J. Fox, Christopher Lloyd, and Lea Thompson. ITSENCLOSURES has come a long way from those early days, but they have never given up on their one true goal, “To safely enclose electronic devices in any environment, protecting them from harsh surroundings, making them more powerful tools, extending their useful life, and above all else, protecting the customer’s processes from costly and unnecessary downtime.”

“Each and every day, everyone at ITSENCLOSURES strives to deliver the most innovative and highest quality products to our strong base of customers,” said JT Spangler, CEO and President of ITSENCLOSURES. “At ITSENCLOSURES, we strive to make our customer service the best asset that we can offer. Our products speak for themselves and our employees consistently work to keep every customer happy with their enclosure purchase, whether big or small. Obviously, we want every customer to be repeat customers.”

For over 30 years, ITSENCLOSURES has been expertly creating and constructing the toughest and strongest electronic enclosures on the market. The large line of NEMA rated PC enclosures are ideal for any setting where dust, dirt, grease, liquids or corrosives are present. ITSENCLOSURES’s advanced products, such as IceStation, NetStation, and ViewStation have become synonymous with the utmost excellence in the enclosure industry.

In the past six months, ITSENCLOSURES has added exciting new products to their already successful line, including the stainless steel IceStation TITAN – NEMA 4X and ViewStation’s Fan Cooled Outdoor Digital Menu Boards for the Quick Service Restaurant Industry, which boasts a 66% energy consumption reduction, compared to compressor based solutions.

“At ITSENCLOSURES, we feel that digital menu boards are the future of not only our company, but the future of quick service restaurant drive-thrus across the country and around the world,” Mr. Spangler explained. “They are vibrant, eye-catching, and can increase efficiency both in customer ordering and in thermal management. Plus, a quick service restaurant’s sales can increase by 8% at the drive-thru, when utilizing digital menu boards. We are thrilled to offer these proven and heavily tested products.”

ITSENCLOSURES plans on adding fresh and ground-breaking products to the marketplace this year and for countless years to come. Through many years of experience, the staff knows that the company must continue to be state-of-the-art to be ahead of the curve.

“Inventiveness will always be our #1 goal for the future and our pledge is to always provide the finest, fastest and most flexible service available,” Mr. Spangler exclaimed. “We know that our products are the best and we will constantly work to get that central message out to the masses.”

About ITSENCLOSURES:

Located 36 miles southeast of Pittsburgh in Mt. Pleasant, Pennsylvania, ITSENCLOSURES has been designing and building the toughest computer enclosures you can find. Their NEMA rated PC enclosures are ideal for any and all environments where dust, dirt and exposure to liquids or corrosives are present.

Their line of computer enclosures, printer enclosures, server enclosures, network enclosures and electronic enclosures protect your investment and allow you to maximize the life of your electronics. ITSENCLOSURES’ products are always ‘Made in the USA’ and allow companies to safely use any computer or monitor in the harshest operating environments. The company has been helping companies protect their technology investments and realize the maximum life cycle of their equipment since its founding in 1985.

For more information on ITSENCLOSURES and their wide array of innovative products, please email ITSENCLOSURES directly (info@itsenclosures.com) or call 1-800-423-9911 to speak to a salesperson.

The post ITSENCLOSURES Celebrates 30 Years of Enclosure Protection appeared first on ITSENCLOSURES.

A reliable, heavy-duty rack enclosure will keep electronics safe from harmful elements, while maintaining security. When searching online for the best rack enclosure solution, it is critical to list all of the electronics to be housed inside of the rack enclosure. The end user must determine how many ‘U’ (rack mount space; 1 rack unit is 1.75 inches high) the enclosure needs to be and how the electronics will be installed. Servers and network equipment hold data that is mission critical and a component malfunction could be detrimental to an IT system and expensive to repair/replace.

Thermal management should also be considered.

Selecting a climate-controlled rack enclosure is contingent on a few variables. Installation location temperatures should be analyzed. Most equipment requires an operating temperature within 70-75° Fahrenheit. Humidity, ambient temperature, heat from in-use electronics, and a dirty environment will only complicate the situation. Always work with a reputable rack enclosure company and fill out a ‘thermal management worksheet’ to gain further insight into choosing the right cooling system for the job.

Cooling questions to ponder for a successful rack enclosure installation:

1. Does the cooling system include a temperature & humidity sensor?

Efficient, well-run rack enclosure systems must maintain a consistent temperature and acceptable level of humidity. Many air conditioners have a temperature and humidity sensor built into the unit. However, when using cooling such as a fan, a separate humidity and temperature control may be advantageous. These sensors can be IP addressable and can provide alerts that the system is nearing an unacceptable temperature/humidity level and should be checked quickly.

2. Does the cooling system provide room to grow?

For the most streamlined process, select a cooling device that provides enough cooling power compared to the heat output on the inside of the rack enclosure. In addition, consider the system in 2, 5 or even 10 years. There is a good chance that the requirements will change. Since high quality enclosure systems are an investment, it may be beneficial to size up the air conditioner, filtered fan system, vortex cooling unit, or heat exchanger to accommodate future needs and equipment.

3. Is the cooling system scalable?

Understand the temperature fluctuations that a busy manufacturing plant in Alabama or Arizona, for example, will experience throughout the year. Exposure to elevated levels of humidity and extreme hot temperatures in the summer will require a different cooling solution than frosty winter months. Do not make the mistake of only being concerned with cooling in the summertime. Much like hot weather, electronics do not bode well in extreme cold temperatures.

Ambient temperatures – as well as temperature extremes – are important to debate when configuring a rack enclosure. The ambient temperature may help or hinder the thermal management required to provide an efficient system. Always err on the side of caution and prepare for the worst-case scenario. When it comes to deploying rack enclosures in harsh environments, it never hurts to be over prepared!

HAVE QUESTIONS? LET US KNOW HOW WE CAN BEST ASSIST YOU! CONTACT AN ‘ITSENCLOSURES EXPERT’ AT 1-800-423-9911 -or- SEND US AN EMAIL:  INFO@ITSENCLOSURES.COM

The post Configuring a Climate Controlled Rack Enclosure appeared first on ITSENCLOSURES.

Securing and organizing server and network equipment is a must for IT departments and industrial companies of all sizes. Finding the perfect enclosure can be a daunting task. Being dust-free is just one applicable factor. Dirty or wet environments can quickly destroy electronic equipment. Before purchasing rack enclosures for a factory or plant use, a company should ponder a few practical questions.

Rack Enclosure Questions to Ask:

How much equipment will be installed?

Rack enclosures are available in various dimensions. The amount of equipment needed will help determine if one or multiple enclosures are needed; a company could also consider bolting multiple enclosures together for added convenience. It is also essential to examine the rack mounting requirements for the servers/electronics that will be used. The amount of available “U” should be researched. According to Penn Elcom Online, “A rack unit (abbreviated as U) is a unit of measurement applied to equipment racks and the servers, disk drives and other devices that they contain. One U is 1.75 inches; the standard rack, at 19 inches, is 42U.”

How does the equipment need to be organized?

If the equipment can sit on a shelf and work properly (like a tower computer or monitor), then it will not need to be bolted to the rack on the inside of the rack enclosure. However, some equipment cannot be installed without attaching to the rack (i.e. servers, switches, and network equipment). It is essential to determine how the equipment will be used and also the readily accessibility of the equipment.

Should the enclosure be free-standing or wall mounted?

Free-standing rack enclosures, with castors, can be moved around the floor if needed. Some enclosures offer the option of having both castors and legs which can be interchanged for differing applications. Many companies prefer the flexibility of being able to move the rack enclosure to different parts of the building. In this instance, lockable castors are the best solution. Yet another option are wall mounted rack enclosures, which are ideal for saving space and keeping the enclosures off the ground and far away from dust and dirt.

What type of cable management is required?

Horizontal and vertical cable management is available to organize the cabling inside of the enclosure. The amount of equipment will determine how much cabling is needed for everything to run smoothly. Rack mountable power strips can be installed to keep the amount of cables – exiting the enclosure – at a minimum. Gasketed split panels may be available on the top, bottom or back; allowing cables to easily enter and exit the enclosure.

What kind of accessories are needed?

Various accessories can be added to make the enclosure the most effective resource for the end user. Accessories such as solid doors or doors with glass inserts, cooling fans, air conditioners, vortex cooling units, heat exchangers, heaters, keyboard drawers, power strips, tapped or square punched rails, shelving, and filler panels can be added to the rack enclosure to create the most beneficial solution.

If installing shelves, should they be fixed or sliding?

Sliding shelves are ideal for accessing equipment for routine maintenance or to change printer media/labels/ink. If the electronics will not be accessed regularly, a simple fixed shelf may be adequate.

What color is needed?

This step is simple. The rack enclosure might come in standard colors like black, blue, gray, or putty. However, if a company desires their enclosure(s) to match a branded color, ask the enclosure provider if it can be powder-coated to match a brand’s specific RAL color.

In addition, many companies require the rack enclosures to be lockable, so that only a select few employees or managers have access to the equipment. Security should always be top of mind, especially if the servers or network equipment contain critical information.

In the end, configuration flexibility is a key point to consider when searching for a new rack enclosure. The rack enclosure will probably outlast most of the equipment that is installed inside of it. As technology changes, the right rack enclosure will still stand strong for years to come!

HAVE QUESTIONS?  LET US KNOW HOW WE CAN BEST ASSIST YOU! CONTACT AN ‘ITSENCLOSURES EXPERT’ AT 1-800-423-9911 -or- SEND US AN EMAIL:  INFO@ITSENCLOSURES.COM

The post Selecting the Best Rack Enclosure appeared first on ITSENCLOSURES.

The latest IceStation industrial computer enclosure is the IO352813-4X stainless-steel monitor/computer enclosure, which was designed specifically for the food, beverage, and pharmaceutical industries in mind. NEMA 4X enclosures will defend against dust, dirt, hose directed fluids, corrosive materials, and most weather conditions.

ITSENCLOSURES IO series enclosures are designed for use with flat panel monitors and thin client/small form computers. The computer enclosures are the perfect solution for limited space environments.

The NEMA 4X IO35 computer enclosure is formed and fully welded with type 304 stainless-steel and a vertical #3F finish. This enclosure features a built-in keyboard drawer to store a desktop or industrial keyboard and mouse. The roll-out keyboard tray – with two quarter turn compression latches – measures 3″ High by 22.62″ Wide x 9.88″ Deep.

The IO35-4X measures 35” High by 28” Wide by 12” Deep with a 25.5” diagonal window measuring 13.75” High by 21.5” Wide. ITSENCLOSURES offers tempered safety glass or polycarbonate window options for the front door. The stainless-steel door panel includes concealed hinges and two quarter turn screwdriver style latches (key locking latches are also available). A monitor sized up to 25-inches can be installed to the internal VESA mount, which is part of the vertical support bracket. The bracket is used to tip out and install the PC/monitor. The chassis includes a 100-cfm re-circulating fan.

“The IO35 is the modern brain-child of our sales team and engineering team with very valuable customer influence. I love that our employees work together to find workable solutions which resonate with our customers. This new stainless-steel IceStation product incorporates pieces of our best-selling products and I am quite pleased with the functionality of the enclosure,” stated JT Spangler, Owner of ITSENCLOSURES, “We will continue to develop and manufacture additional heavy-duty units throughout 2020. Our dynamic products continue to innovate and advance beyond our wildest expectations and we feel that solid growth is in our near future.”

For installation, the heavy-duty IO35-4X computer enclosure can be affixed to a wall with a mount, a stainless-steel bolt down pedestal, or a stainless-steel mobile pedestal with swivel castors, which can be locked into place. A Roxtec sealed cable entry gland can be installed – in various spots on the enclosure – for the ingress and egress of power cords, wires, and cables. ITSENCLOSURES also offers surge protectors, industrial keyboards, and thermal management options, like stainless-steel vortex heat exchangers for cooling or an electric thermal heater for refrigerated environments.

ITSENCLOSURES has two additional stainless-steel monitor/computer enclosures; the IO28-4X (measuring 28″ High x 26″ Wide x 8″ Deep) for a 22” monitor and the IO29-4X (measuring 29″ High x 28″ Wide x 12″ Deep) for a 25” monitor.

“Computers, printers, monitors, and other essential electronics are protected in our IceStation NEMA rated products. As we always say, our monitor, printer, and computer enclosures are built-to-last and we stand by that promise,” added Mr. Spangler.

IceStation by ITSENCLOSURES has over 3 decades of experience in successful printer, monitor, keyboard, and computer enclosure deployments and offers a wide variety of ‘built-to-last’ products.

For more information and to watch the product video, visit the IO35-4X product page

About ITSENCLOSURES

ITSENCLOSURES builds the strongest, NEMA rated computer enclosures, which are ideal for all environments where dust, dirt, and exposure to liquids or corrosives are present. The IceStation line of products allow the use of computers, printers, keyboards, and monitors in the harshest locations and will protect a company’s investment and maximize the lifetime of the electronics protected.

To learn more about ITSENCLOSURES, contact the Sales Department: 1-800-423-9911 –or– info@itsenclosures.com

###

The post ITS Announces IO35-4X Computer Enclosure appeared first on ITSENCLOSURES.

COMPANY SYNOPSIS:
In business since 1902, Senior Flexonics Pathway (SFP) has two locations in the United States: New Braunfels, Texas and Lewiston, Maine. According to SFPathway.com, the company has been a pioneer in delivering solutions to movements in high pressure and temperature process equipment. Senior Flexonics provides custom designed expansion joints, dampers, and HVAC for piping and ducting applications.

HOW DID THEY FIND ITSENCLOSURES:
When researching stand-up enclosures for their plant, Senior Flexonics Pathway found ITSENCLOSURES on the Internet. While at ITSENCLOSURES.com, SFP reached out to the ITS sales department via the online chat tool. Originally, SFP was interested in a unit that could house a touchscreen monitor. After receiving a follow-up email from ITSENCLOSURES, Patrick Miller, the IT Manager, requested pricing on a stand-up enclosure and decided against deploying a touchscreen.

PROJECT:
Senior Flexonics Pathway was in search of a mobile inventory computer enclosure for its workers. SFP wanted to save employees from walking to different parts of the plant to perform tasks. According to Patrick Miller, IT Manager at Senior Flexonics Pathway, SFP wanted to provide employees with the equipment to take inventory, print, labels and scan barcodes at the point of where the work is actually being done, on the manufacturing floor.

CHALLENGES:
Senior Flexonics sought an all-in-one solution that would allow all of their complex systems to work together in one enclosure. SFP’s manufacturing environment is quite harsh, and required a heavy duty NEMA 12 enclosure solution.

SOLUTION:
Senior Flexonics Pathway purchased a number of IceStation TITAN (IS603027-12) computer enclosure workstations. The freestanding enclosure solution consisted of 24” extension sliding shelf brackets and a hinged printer door. The added accessories were installed for the barcode printers that are used throughout the workday. The hinged printer door makes it simple to retrieve labels and the sliding shelf brackets create an efficient way to change the media and load additional labels. In order to regulate the temperature inside of the enclosure, a 200 CFM filtered fan system, with thermostat, was installed.

INSTALLATION DATE:
Senior Flexonics purchased the NEMA 12 computer enclosures in the spring of 2015 to be installed in the New Braunfels, TX and Lewiston, ME locations. The units are deployed in key areas of the production floor, including the Metal Bellows manufacturing area, Parts Distribution, and Burn Table work centers.

SUMMARY OF PROJECT:
Mr. Miller summed up the success of the project, “The products that Senior Flexonics Pathway makes [are] in some of the harshest environments in the world. IceStation computer enclosures were a perfect fit for our company! ITSENCLOSURES products are rugged and well designed. [The TITANS] have given our shop employees the ability to access internal system applications and to speed up the processing of part issues.” He continued, “The flexibility has been a definite plus, as the IceStation [units] have been really easy to adapt to our specific needs. We have a wireless computer inside of the unit, along with a wireless barcode printer. Our employees are able to do part issues, print barcodes labels, check drawings, review hotlists, welding procedures, and to clock in and out of jobs.”

“We’ve tested other stand-alone units, and IceStation has been an exceptional addition to our facility!”

ADDITIONAL PRODUCT INFORMATION:

• •   IceStation TITAN Family

HAVE QUESTIONS?
Let us know how we can best assist you! Contact an ‘ITSENCLOSURES expert’ at 1-800-423-9911 -OR- send us an email: info@itsenclosures.com

The post Senior Flexonics Pathway – Computer Enclosure appeared first on ITSENCLOSURES.

COMPANY SYNOPSIS:
Puratos is an international company, which has been in business for almost 100 years, dating back to its original founding in Brussels, Belgium. The American corporate headquarters are in Cherry Hill, New Jersey, with additional locations in New Jersey, Oregon, Wisconsin, California, Florida, and Washington. Specializing in desserts and the like, Puratos is a premium supplier of products that compliment baking, pastry, and chocolate products. According to the Puratos website, “Products and services are available in more than 100 countries around the world, and in many cases actually produced there by our subsidiaries. Clients are artisans, industry, retailers and food service.”

HOW DID PURATOS FIND ITSENCLOSURES:
In January of 2014, Puratos was in the initial stages of planning a merger of two of its plants and required heavy-duty computer enclosures to house vital electronics. After searching online for pc and printer enclosures, Puratos found ITSENCLOSURES and reached out for initial enclosure options and ballpark pricing. After engaging with Puratos, ITSENCLOSURES made the decision to travel to New Jersey to evaluate the project in person.  

PROJECT:
The Puratos location in Pennsauken, New Jersey was in the process of merging two manufacturing plants and were determined to upgrade their enclosure equipment. They desired a freestanding enclosure to house a barcode printer, computer, keyboard, scanner, mouse, and a wide screen monitor. Puratos was also interested in ITSENCLOSURES’ line of flat panel monitor enclosures, which can be bolted to a wall, pedestal, or arm.

CHALLENGES:
ITSENCLOSURES toured the Puratos plant in February of 2014 to assess the challenges and assist with the development of a viable solution. Part of the plan required computer enclosures to protect against dust and dirt, while another plan required stainless steel to withstand a wash-down environment. One of the biggest challenges: Puratos is a food production company and must maintain the utmost cleanliness throughout the factory.

SOLUTION:
After visiting the plant, ITSENCLOSURES made the recommendation to deploy the NEMA 12 IceStation TITAN freestanding enclosure in areas that did not require a heavy washdown. Each Puratos enclosure houses a barcode printer, computer, and a wide screen format monitor. ITSENCLOSURES also provided a side mounted enclosure to house a hand-held barcode scanner, installed on the right side of the cabinet. An industrial, heavy-duty keyboard/hula point combo mounts to the sloped work surface.

The second solution involved a customized stainless steel operator interface enclosure, which mounts to existing swing arms already installed throughout the plant. ITSENCLOSURES provided custom, flat topped IO28268-4X monitor enclosures with touchscreen cutouts. The touchscreen cutout was factory installed in the IO28 door at ITSENCLOSURES prior to shipping. Previously, Puratos purchased a competitor’s NEMA 4X enclosure that required an ‘in the field’ modification to install the panel mount touchscreen. ITSENCLOSURES’ solution was, therefore, more efficient and saved Puratos money in the long run.

SUMMARY OF PROJECT:
The expansion project took place for most of 2014 and continued into 2015-2016. A second phase of the project (Spring of 2015) included stainless steel IO292813-4X flat panel monitor enclosures (accommodating up to a 25” widescreen monitor), which mount directly to the wall.

JT Spangler, CEO and Owner of ITSENCLOSURES, was pleased with the outcome of the project, “I enjoy the opportunity to visit a plant for a firsthand look at the operation and discuss a solution for specific needs. Puratos is an outstanding company to work with and we enjoyed watching everything come together. This project adds another successful installation to the ITSENCLOSURES portfolio!”

ADDITIONAL PRODUCT INFORMATION:

•   IceStation TITAN Family
•   Monitor Enclosures

HAVE QUESTIONS?
Let us know how we can best assist you! Contact an ‘ITSENCLOSURES expert’ at 1-800-423-9911 -OR- send us an email: info@itsenclosures.com

The post Puratos Corporation – Computer Enclosures appeared first on ITSENCLOSURES.

COMPANY SYNOPSIS:
Engineered Software Products (ESP) began operation over 29 years ago as a traditional control systems integrator providing PLC, HMI, and plant floor information management solutions. Ten years ago, ESP expanded its capabilities and added engineered power solutions to its provisions, referred to as a turnkey electrical package, providing: Portable Prefabricated Electrical Building (eHouse), Electrical Equipment – Power Distribution and Motor Control, Automation System – PLC, HMI, Data Management, Electrical Engineering Services – Electrical Design and Automation Programming

ESP’s directive, as a technology partner, has been to develop automation strategies, for client’s plants, which are current with today’s ever-changing technology. The primary goal for each plant is to provide an expandable open architecture control system, which is cost effective and consistent with corporate standards. To achieve this goal, ESP has been instrumental in assisting its clients in establishing key standards, as they relate to the PLC/HMI automation and power distribution/motor control systems. Throughout the years, ESP has provided control systems to a variety of industries, including Aggregates, Cement, Chemical, Food & Beverage, Pulp & Paper, Traffic Control, Wastewater, and Wood Pellets.

HOW DID ESP FIND ITSENCLOSURES:
Engineered Software Products (ESP) scoured the Internet in search of rugged, industrial, computer and printer enclosures and discovered ITSENCLOSURES. After researching and reviewing the ITSENCLOSURES website, ESP located the IceStation product line, which was exactly what they were looking for in an computer and printer enclosure product. 

PRINTER ENCLOSURE PROJECT:
ESP provides turnkey electrical buildings and elevated control towers. They required an enclosure to fit under a countertop in control rooms. A computer and printer enclosure was needed to protect PC and printer equipment and be deployed by Greenfield plants mostly in the aggregate, mining and cement industries.

CHALLENGES:
ESP desired a computer and printer enclosure which could protect against extremely dusty, dirty environments, and provide security and stability against vibrations from plant equipment.

PRINTER ENCLOSURE SOLUTION:
ESP chose the NEMA 12 IceStation IS362626 computer and printer enclosure, which includes 2 adjustable, vented shelves, lockable front and rear doors, industrial-grade swivel castors, and a tool-free rear split panel. These benefits were the ultimate reason why ESP decided to utilize the IS362626-12 computer and printer enclosure. According to Jeff Patenaude, Principal at Engineered Software Products Inc., the IS36-12 is a good fit, because it is “dustproof, has rubber bushings on its shelves to protect against vibration, has a convenient gland plate for easy cable entry, and [industrial] castors for ease of use.”

SUMMARY OF PROJECT:
ESP continues to deploy many of the IS362626-12 computer and printer enclosures at various plants and locations across the United States. Jeff Patenaude is very pleased with the staff at ITSENCLOSURES and with the heavy-duty products, “ITSENCLOSURES has been a reliable supplier that delivers a quality product on time, every time.”

ADDITIONAL PRODUCT INFORMATION

• IS362626-12 Printer Enclosure

HAVE QUESTIONS?
Let us know how we can best assist you! Contact an ‘ITSENCLOSURES expert’ at 1-800-423-9911 -OR- send us an email: info@itsenclosures.com

The post Engineered Software Products – Printer Enclosure appeared first on ITSENCLOSURES.